Brake Kit, Front, 5x205mm, SS Braided Hoses, AC Industries
AC Industries newest brake kit was designed for a simple no hassle install on 1964-67 Buses. This kit bolts to the stock spindle and is designed using a vented wide five rotor with a 5x205mm lug pattern and does not change the factory offset. Where your tire/wheel sets with the factory drum is where it will remain with this kit. This was designed to work with original 14″ wheels and most 15″ aftermarket aluminum wheels. This AC Industries kit is designed to be installed with basic hand tools.
Kit Includes: (2) Vented Brake Rotors(5x205mm Bolt Pattern), (2) Brake Calipers w/Pads, (2) Caliper Brackets, (2) Stainless Steel DOT Brake Hoses, (1) Dual Circuit Master Cylinder, (1) Brake Fluid Reservoir, (2) Inner Bearings, (2) Outer Bearings, (2) Grease Seals, (10) 14mm Wheel Studs(Screw-In Style), (10) Lug Nuts(Ball Seat), (1) Mounting Hardware and (1) Instruction Sheet.
Installation Note: On 1964-66 Bus, this kit will upgrade it to a dual circuit master cylinder (included in the kit). Modifications to the front splash pan to clear the longer master cylinder will be required.
Brake Kit, Front, 5x205mm, SS Braided Hoses, AC Industries, Sold as Kit
|VW Bus||All Models||1964 - 1967|