All Products

This is an axle spacer kit that includes two spacers for early swing axle cars, one kit will do one side of the car for both side please purchase two kits. Please verify you have a swing axle car, In 1968 Volkswagen introduced the auto-stick and the cars were built with an IRS rear suspension. ..

This axle tube retaining kit is designed to be used on swing axle type 1 transmissions to help reinforce the axle tube side covers and help keep the axle tubes from pulling away from the transmission.   Application Note: This is considered a universal part and can fit many different applic..

Dubbed the "Helping Hand" tool, helps loosen stubborn hi-torqued axle and gland nuts by holding the drum or flywheel steady.  Designed to be used with 6 volt(180mm), 12 volt (200mm) flywheels as well as 4x130mm and 5x205mm lug patterns. This is designed to be used as a "helping hand" and can be..

Socket used for flywheel gland nuts and axle nuts on all models. Note: Will not work on Bus axle nuts(46mm), will work on Bus gland nuts.Socket, 36mm, 1/2 in. Drive, 6 Point, Sold ea...

This 3pc backing plate kit will fit a 12 volt alternator or generator application and comes with inner and outer backing plates and reinforcement ring. Installation Note: Designed for alternator or generator that are 105mm in diameter and will not fit early generators that are 90mm in diameter. ..

This 3pc backing plate kit will fit a 12 volt alternator or generator application and comes with inner and outer backing plates and reinforcement ring.  Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Applicati..

BLK ALT/GEN BACK PLATE..

Backing Plate Alt/Gen 12-1600cc Chrome Backing Plate, 113119261C, Alt/Gen, Chrome, Sold ea. ..

Backing Plate Front T-1 66-77 Std L/R..

Back-up light/Reverse light in a chrome housing with mounting bracket.   Application Note: This light can be used on earlier cars that have been equipped with a reverse light switch in the transmission nose cone. This is considered a universal part and can fit many different applicati..

Back-up light/Reverse light in a chrome housing with mounting bracket.   Application Note: This light can be used on earlier cars that have been equipped with a reverse light switch in the transmission nose cone. This is considered a universal part and can fit many different applicati..

Back-up light/Reverse light with a glass lens in a chrome housing.   Application Note: This light can be used on earlier cars that have been equipped with a reverse light switch in the transmission nose cone. This is considered a universal part and can fit many different applications ..

Back-up light/Reverse light glass lens designed to fit most stock and aftermarket light housings.   Application Note: This light can be used on earlier cars that have been equipped with a reverse light switch in the transmission nose cone. This is considered a universal part and can f..

Replacement rubber boot for the lower ball joint.Ball Joint Boot Kit, Lower, Left or Right, Sold ea...

Replacement rubber boot for the upper ball joint.Ball Joint Boot Kit, Upper, Left or Right, Sold ea...

"Description"  Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purch..

Bamboo Parcel Tray for mounting under the dash on standard beetle sedans. Includes mounting hardware.  Parcel Tray, Bamboo, Sold ea...

Barrel Nut, 311129777, Accelerator & Heater Cables, Sold ea...

This braided ground cable goes from the battery negative terminal to the pan bolt securing the body to the pan.  Cable is approx. 14" in length.  Battery Cable, 111971235C, Negative, Braided, 14in., Sold ea...

Battery Tray T-2 68-72..

These Strong Steel main bearing thrust plates eliminate movement of the main shaft bearing. Aids in maintaining the alignment of the gears on the main and pinion shafts to give the gears FULL contact thereby reducing the chances of failure. Allows the use of a 2 bolt nose cone to be used on 3 bolt l..

BILLET BREATHER STAND,BLACK..

"Description"  Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purch..

Bleeder Valve 6mm x 28mm All VW/Audi Bleeder Valve, 211611477A, Wheel Cylinder, 6x28mm, Sold ea...

Installation Note: All sheet metal parts are sent with a black protective coating to keep it from rusting. This coating MUST BE REMOVED prior to applying primer to the sheet metal. If your sheet metal is scratched this is OK, again the coating is only there for rust purposes and will be removed..