Brand: EMPI
Model: 00-3425-0
2 Tip Extractor for '73 - '74 Thing, featuring 1 3/8" tubing and adjustable tips for body clearance.
Installation Note: Most headers and mufflers are coated with a layer of paint which acts as a rust inhibitor, and will burn off once the exhaust gets hot. It is best to remove this coating and apply..
$165.95
Brand: EMPI
Model: 00-3418-0
European looks with Muffler featuring Dual Chrome Exhaust Tips. Complete with hardware.
Installation Note: Most headers and mufflers are coated with a layer of paint which acts as a rust inhibitor, and will burn off once the exhaust gets hot. It is best to remove this coating and apply a quality hi..
$135.95
Brand: EMPI
Model: 00-3761-0
Stainless Steel Exhaust System– precision-designed with Dual Chrome Baffled Tips that exit thru the stock apron cut-outs. Features thick flanges for secure fit and seal. 1 3/8" S/S Tubing. Includes aluminum flex hose, gaskets and hardware. Will work with 13-1600cc engines and comes with single pipe ..
$279.95
Brand: EMPI
Model: 00-3766-0
European looks with Muffler featuring Dual Chrome Exhaust Tips. This exhaust system is designed for the 1200cc 40hp engine and will not work on 13-1600cc engines.
Installation Note: Most headers and mufflers are coated with a layer of paint which acts as a rust inhibitor, and will burn off once the..
$137.95
Brand: EMPI
Model: 00-9195-0
Prevents debris from being ingested into the fan. A must for all off-road applications or when engine compartment is subject to external debris. Does not affect intake air volume. The screen is made of heavy duty metal and chrome plated. Fits all up-right fan shrouds with rear fan lip.
Applicatio..
$8.95
Brand: EMPI
Model: 00-5750-0
Dubbed the "Helping Hand" tool, helps loosen stubborn hi-torqued axle and gland nuts by holding the drum or flywheel steady. Designed to be used with 6 volt(180mm), 12 volt (200mm) flywheels as well as 4x130mm and 5x205mm lug patterns. This is designed to be used as a "helping hand" and can be..
$23.95
Brand: EMPI
Model: 131198261
This 3pc backing plate kit will fit a 12 volt alternator or generator application and comes with inner and outer backing plates and reinforcement ring. Installation Note: Designed for alternator or generator that are 105mm in diameter and will not fit early generators that are 90mm in diameter. ..
$12.95
Brand: EMPI
Model: 00-9118-0
EXTRA LONG BOLT W/WASHER Bolt & Washer, 00-9118-0, Crankshaft Pulley, Extra Long, Chrome, Sold ea...
$4.95
Brand: EMPI
Model: 00-9117-0
Our Chrome Pulley Bolt and Washer adds the finishing touch to all crankshaft pulley installations. Fits with any stock or custom pulley.Installation Note: Extra Long Bolt must be used with Bolt-In Sand Seal Pulleys. Bolt & Washer, 00-9117-0, Crankshaft Pulley, Stock Length, Chrom..
$4.95
Brand: EMPI
Model: 113301165A
Replacement bolt-on zinc plated bowden tube bracket that mounts to the transmission side cover. Will work for 6 or 12 Volt transmission applications. Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Appli..
$6.95
Brand: EMPI
Model: 16-2526-0
This Wilwood disc brake caliper set is designed as a performance upgrade to the tried and true Ghia/311 calipers used in most disc brake conversion kits today. This is a billet stainless steel machined two piston caliper with brake pads and mounting hardware. This caliper comes with a standard M10-1..
$399.95
Brand: EMPI
Model: 22-2963-7
Replacement Front Rotor, 5/130 Porsche and 5/4.75" Chevy, Ball Joint Front, All Type 1 66-79 w/ Disc Brakes, Ghia 66-74, Type 3 66-71 Double drilled for use with either Porsche 5x130 bolt pattern
using M14-1.5 threads or Chevy 5/4.75" bolt pattern using 12mm theads. Must purchase studs separately. ..
$96.95
Brand: EMPI
Model: 15-2045-0
Bumper Brackets, Front, Conversion Brackets Late to Early, Sold as Pair..
$43.95
Brand: EMPI
Model: 15-2046-0
Bumper Brackets, Rear, Conversion Brackets Late to Early, Sold as Pair..
$43.95
Brand: EMPI
Model: 00-9615-0
Designed to protect against over-camber on swing axle rear suspensions. Easily bolts to the bottom of the trans and features zinc plated steel components and Urethane bushings. Installation Note: This camber compensator will not work with crashbox or split case Type 1 transmissions. ..
$95.95
Brand: EMPI
Model: 21-4315-0
These Low Profile 5/16in.-24 SAE Grade 8 Cam Bolts offer a reduced head thickness for extra clearance when installing a 3-Bolt Cam & Gear with some Hi-Performance oil pumps. These bolts will clear all pumps.
Set of three (3) Camshaft Bolts & Washers.
Application Note: This is considere..
$3.95
Brand: EMPI
Model: 21-2515-0
Steel cam and crank gear set with straight cut teeth creates less drag for increased
horsepower. This design reduces thrust load on the cam bearings preventing premature
failure. Cam timing is adjustable with the special offset washers. Manufactured from 8620
Carbon Steel for superior strength al..
$91.95
Brand: EMPI
Model: 21-2510-0
Allows you to easily dial in your cam timing with the offset washers. The gear is precision
machined from high quality aluminum and the kit includes special washers and 5/16in. - 24
SAE Grade 8 bolts.
Application Note: This is considered a universal part and can fit many different applications ..
$42.95
Brand: EMPI
Model: 21-2500-0
EMPI Bolt-On Aluminum Cam Gear is made from high quality aluminum and precision machined for trouble free valve train performance. Works with all aftermarket and O.E. camshafts.
Application Note: This is considered a universal part and can fit many different applications based on modifications to..
$24.95
Brand: EMPI
Model: 16-9524-0
Use this billet cam plug during engine assembly for a secure, leak free seal. Fits Volkswagen 12-1600cc engines (40hp). Case must be machined for camshaft plug groove. Camshaft Plug, 16-9524-0, Billet Aluminum w/O-ring, EMPI, Sold ea...
$8.95
Brand: EMPI
Model: 47-7411-0
If improving performance without sacrificing fuel economy is your
desire, then the EMPI dual 34 EPC kit is the way to go. All Kits
feature: Aluminum Alloy Hex Bar with Steel Ball Ends - Sealed Aircraft
Heim Rod Ends - High Flow Aluminum Intake Manifolds -Thick High Strength
Steel Linkage Mou..
$335.95
Brand: EMPI
Model: 00-4011-0
Repair pulled head studs with a new case saver. Case savers provide
more surface area for a great hold. This case saver is for M10-1.5 head
studs and has a 1/2-20 outer diameter. These case savers come as a set of 8. Case Savers, 00-4011-0, M10-1.5ID x 1/2-20OD, EMPI, Sold as Set..
$9.95
Brand: EMPI
Model: 00-4012-0
Repair pulled head studs with a new case saver. Case savers provide
more surface area for a great hold. This case saver is for M10-1.5 head
studs and has a M14-2.0 outer diameter. These case savers come as a set of 8. Case Savers, 00-4012-0, M8-1.25ID x M12-1.5OD, EMPI, Sold as Set..
$9.95
Brand: EMPI
Model: 00-4004-0
Repair pulled head studs with a new case saver. Case savers provide
more surface area for a great hold. This case saver is for M8-1.25 head
studs and has a M12-1.5 outer diameter. These case savers come as a set of 8. Case Savers, 00-4004-0, M8-1.25ID x M12-1.5OD, EMPI, Sold as Set..
$9.95
Brand: EMPI
Model: 00-4003-0
Repair pulled head studs with a new case saver. Case savers provide
more surface area for a great hold. This case saver is for M8-1.25 head
studs and has a M14-2.0 outer diameter. These case savers come as a set of 8. Case Savers, 00-4003-0, M8-1.25ID x M14-2.0OD, EMPI, Sold as Set..
$9.95