Oil Hose & Fittings

Hose Clamps, 00-9225-0, 3/8in - 1/2in Hose, EMPI, Sold as Set..

Oil Hose Fitting, 00-9214-0, 1/2 NPT Male to 1/2 Hose Barb, Brass, EMPI, Sold as Pair..

Oil Hose Fitting, 00-9213-0, 1/2 NPT Male to 3/8 Hose Barb, Brass, EMPI, Sold as Pair..

Oil Hose Fitting, 00-9212-0, 3/8 NPT Male to 1/2 Hose Barb, Brass, EMPI, Sold as Pair..

Oil Hose Fitting, 00-9211-0, 3/8 NPT Male to 3/8 Hose Barb, Brass, EMPI, Sold as Pair..

3/8in. Female, 90° 3/8in. Male Fitting.Fittings, 00-9227-0, 3/8in. Female, 90° 3/8in. Male, EMPI, Sold ea..

HITEMP OIL HOSE 1/2" X 25ft..

High Temperature / High Pressure 1/2" Oil Hose for use with oil coolers and/or remote oil filter. This hose is made to work between -40° to 312° F with a working pressure of 300 PSI and a burst pressure of 1200 PSI. This is a 5 foot length of hose.Oil Hose, 00-9210-0, 1/2in, 5ft, High Pressure ..

High Temperature / High Pressure 3/8" Oil Hose for use with oil coolers and/or remote oil filter. This hose is made to work between -40° to 312° F with a working pressure of 300 PSI and a burst pressure of 1200 PSI. This is a 5 foot length of hose.Oil Hose, 00-9209-0, 3/8in, 5ft, High Pressure ..

Designed to add a full flow oil system without machining the crankcase. Screws into the rear oil by-pass galley (spring & plunger must be removed) and provides the return route for oil from a full flow pump cover. Installs without engine removal. It has an 8AN, 37° male fitting. This can be conv..

UNIVERSAL OIL RETURN,#10,BLK..

Put your oil cooler fan on autopilot with this inline oil temperature thermostat. No worries about cooking your engine because there are no more switches to remember to turn on or off. This inline thermostat attaches to the inlet port of the oil cooler or it can be spliced into existing 1/2in. hose,..

Another GTV Era EMPI Part Has Been Authentically Reproduced to Finish Off Your Custom Build! With EMPI’s Exclusive Oil Pressure “T” Fitting, You Have the Ability to Mount Up To 3 Sending Units to the Same Oil Pressure Passage. Cast in Brass and Designed Using CAD Software You Can Be Assured That Thi..

Another GTV Era EMPI Part Has Been Authentically Reproduced to Finish Off Your Custom Build! With EMPI’s Exclusive Oil Pressure “T” Fitting, You Have the Ability to Mount Up To 3 Sending Units to the Same Oil Pressure Passage. Cast in Brass and Designed Using CAD Software You Can Be Assured That Thi..