Part #: 16-5109-0
Brand: EMPI
The strength and durability of Urethane will out-last and out-perform standard rubber products in every application. From Shift Couplers to Bump Stops, install Urethane and never look back! All Urethane is red in color except where noted.Position(s): Front, Left or RightApplication Note: Thi..
$24.95
Out of Stock
Part #: 22-2852-0
Brand: EMPI
These Torsion Springs are for use with Narrowed Adjustable Ball Joint Axle Beams.
Two Torsion Spring sets are required per Axle Beam.
Torsion Spring Set, 22-2852-0, Narrowed, Ball Joint, Upper or Lower, EMPI, Sold as Set..
$122.95
Part #: 00-3126-0
Brand: EMPI
This tow bar comes with a 1-7/8" ball coupler and is designed for a stock width front link pin or ball joint beam. Application Note: This is designed for a stock height vehicle but will fit some lowered or raised vehicles based on ride height. Please verify your application before purchase to e..
$174.95
Part #: 00-3128-0
Brand: EMPI
This tow bar comes with a 2" ball coupler and is designed for a 2" narrowed width front link pin or ball joint beam. Application Note: This is designed for a stock height vehicle but will fit some lowered or raised vehicles based on ride height. Please verify your application before purchase to..
$212.95
Part #: 00-3131-0
Brand: EMPI
This tow bar comes with a 2" ball coupler and mounting plate designed for a stock Super Beetle front suspension. Application Note: This is designed for a stock height vehicle but will fit some lowered or raised vehicles based on ride height. Please verify your application before purchase to ens..
$283.95
Special Order
Part #: 00-3127-0
Brand: EMPI
This tow bar comes with a 2" ball coupler and is designed for a stock width front link pin or ball joint beam. Application Note: This is designed for a stock height vehicle but will fit some lowered or raised vehicles based on ride height. Please verify your application before purchase to ensur..
$176.95
Part #: 00-9526-0
Brand: EMPI
Prevents wheel hop and engine flex by supporting rear of engine. Installation Note: This device requires drilling of the body to mount the brackets. Application Note: This is considered a universal part and can
fit many different applications based on modifications to the ve..
$89.95
Part #: 16-5122-0
Brand: EMPI
These new Urethane a-arm bushings are designed to replace the inner sleeve and rubber cushion section of the bushing. This prevents vertical motion at the pivot point which is greatly magnified at the end of the arm, altering any carefully planned alignment. Kit comes complete with four bushings and..
$21.95
Part #: 98-3002-B
Brand: EMPI
The EMPI Aluminum Transaxle Case is the perfect starting point when building a High-Performance Transaxle. The Case features a high-quality aluminum alloy with cast in gussets that prove more rigidity and strength. Used by many of the industries top transaxle builders.Application Note: This is consi..
$566.95
Part #: 17-2536-0
Brand: EMPI
Secures a Type 1 transmission from the bottom of the front case bolts. Supports from under the frame
horns to reduce upwards flex and reduce loads on the front transmission mount, zinc plated. Urethane stops included. Application Note: This is considered a universal part and can fit ..
$49.95
Part #: AC000134B
Brand: EMPI
This tool can be used for the transmission drain plug as well as the fill plug on the VW transmission. Additionally this tool can be used for the pivot bolt on late model IRS chassis. Tool attaches to a 3/8in drive ratchet. Transmission Drain Plug Socket, 00-5773-0, 17mm, 3/8in. Drive, EM..
$4.95
Part #: 00-5788-0
Brand: EMPI
This Allen wrench is designed for the transmission fill and drain plugs but will also fit the pivot bolts on late model IRS suspensions. Transmission Drain Plug Wrench, 17mm, Sold ea...
$13.95
Part #: 00-9520-0
Brand: EMPI
Facilitate the seamless integration of a complete synchromesh 61-72 transaxle into pans designed for 52-59 models. Easy bolt-on installation, includes hardware.Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. App..
$19.95
Part #: 00-9528-0
Brand: EMPI
These robust steel mounts serve as a superior alternative to the standard rubber mounts, effectively eradicating any undesirable flex and wheel hop. This proactive solution mitigates the risk of transmission issues, including nose cone breakage and mount fractures, commonly experienced in off-road a..
$11.95
Part #: 16-9910-0
Brand: EMPI
These robust steel mounts serve as a superior alternative to the standard rubber mounts, effectively eradicating any undesirable flex and wheel hop. This proactive solution mitigates the risk of transmission issues, including nose cone breakage and mount fractures, commonly experienced in off-road a..
$12.95
Part #: 00-9530-0
Brand: EMPI
EMPI Type-1 2-bolt nose cone transmission mounting kit, thoughtfully engineered to swap out conventional rubber mounting bushings with sturdy solid-style mounts. This kit also replaces the lightweight stamped steel cradle mount, helping to eliminate any undesirable flexing. The entire setup is coate..
$44.95
Part #: 00-9507-0
Brand: EMPI
EMPI Type-1 2-bolt nose cone transmission mounting kit, thoughtfully engineered to swap out conventional rubber mounting bushings with sturdy solid-style mounts. This kit also replaces the lightweight stamped steel cradle mount, helping to eliminate any undesirable flexing. With this kit it takes th..
$67.95
Part #: 16-9905-0
Brand: EMPI
These IRS side covers are made from H.D. Aluminum Alloy to handle your high horsepower performance application. IRS Axle Side Cover, 16-9905-0, Heavy Duty, Aluminum, EMPI, Sold ea...
$105.95
Part #: 16-9903-0
Brand: EMPI
These Swing Axle side covers are made from H.D. Aluminum Alloy to handle your high horsepower application. Comes with Bowden tube bracket.Swing Axle Side Cover, 16-9903-0, Heavy Duty, Aluminum, EMPI, Sold ea...
$113.95
-250x250.jpg "Truss Bar, Rear, Black")
Out of Stock
Part #: 17-2975-0
Brand: EMPI
Triangulates the shock towers and the frame horns, helping to prevent movement of the engine and trans upon acceleration preventing wheel hop. Adjustable rod ends allow for variations and/or preload. Features 3/4” Steel Tubing, Powder-Coated Black for good looks and durability. Installation Not..
$305.95
New
Part #: 00-3602-0
Brand: EMPI
Take the restriction out of your air-cooled engine with the EMPI Tuck-Away Dual Glass Pack Exhaust System. Engineered for performance and daily-driver comfort, this system features 16-gauge steel header tubing that maximizes exhaust flow while maintaining the correct backpressure for excellent mid-r..
$279.95
New
Part #: 98-0509-B
Brand: EMPI
This complete Turn-Key Engine was constructed using top-quality components from our extensive EMPI product lineup. Every 1914cc turn-key engine is dressed out, tested and tuned on the EMPI dyno ensuring that your new engine is ready to install and get your VW back on the road! This 100% new and read..
$10,499.95
In Stock
Part #: 98-0499-0
Brand: EMPI
This complete Turn-Key Engine was constructed using top-quality components from our extensive EMPI product lineup. Every 1914cc turn-key engine is dressed out, tested and tuned on the EMPI dyno ensuring that your new engine is ready to install and get your VW back on the road! This 100% new and read..
$10,924.95
Part #: 21-2031-0
Brand: EMPI
EMPI Heavy Duty Performance Swivel Feet Adjusters feature a large foot print that covers the valve stem to reduce the chance of mushrooming and side load friction. Contact areas are precision ground and hardened. Features slotted screw head design. Kit is complete with rocker stand shims to insure c..
$56.95