Engle Cams VW Camshaft, W90, .297 Cam Lift, 265 Duration, 108 Lobe Center
Engle Cams have been the camshaft of choice for the top engine builders in the Volkswagen industry for 40+ years. Engle Cams offers a very comprehensive choice of grinds for every application. Fits 12-1600cc Volkswagen based engines. Must use an early style oil pump designed for flat camshafts. Designed to be used with 1.1:1 rockers.
Camshaft Specifications | ||
Intake | Exhaust | |
Valve Lash (Inch): | .004" | .004" |
Cam Lift (Inch): | .297" | .297" |
Advertised Duration: | 265° | 265° |
Duration @ 0.050": | 224° | 224° |
Lobe Center: | 108° | 108° |
Installation Note: New camshafts should always be installed with new lifters(It is suggested to use the same brand lifter as your camshaft brand). Valve lash is shown for stock rockers with aluminum pushrods, if using chromoly pushrods or lash caps valve lash should be set to .000" Lifter to Camshaft clearances need to be checked for proper installation. A minimum of .040" is needed. This should be checked between the nose of the cam lobe and the lifter seated in the lifter bore of the case. Spot facing the case lifter bores may be required.
WARRANTY NOTE: The Engle Cams warranty stipulates you must use Engle Cams lifters to maintain the warranty. Using another manufacturers lifters will void this warranty.
Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purchase to ensure this part is correct for your project.