Web Cam VW Camshaft, 118, .365 Cam Lift, 286 Duration, 108 Lobe Center, 00-052, VW Bug 49-77, Super Beetle 71-79, Ghia 55-74, Bus 50-71, Type 3 61-73, Thing 73-74
Web Cams have been race proven for years, and provide reliable horsepower at all power ranges. This Web Cam grind 118 is designed for good mid and upper end performance for small displacement street engines using 1.1:1 rockers. It is recommended when using aftermarket camshafts to upgrade to dual valve springs and convert to a solid rocker shaft. Fits 12-1600cc Volkswagen based engines. Must use an early style oil pump designed for flat camshafts. Designed to be used with 1.1:1 rockers.
Camshaft Specifications | ||
| Intake | Exhaust | |
| Valve Lash (Inch): | .006" | .006" |
| Cam Lift (Inch): | .365" | .365" |
| Valve Lift (Inch): 1.1:1 | .401" | .401" |
| Advertised Duration: | 286° | 286° |
| Duration @ 0.050": | 245° | 245° |
| Lobe Center: | 108° | 108° |
Installation Note: New camshafts should always be installed with new lifters(It is suggested to use the same brand lifter as your camshaft choice). Valve lash is shown for aluminum pushrods, if using chromoly pushrods or lash caps valve lash should be set to a loose .000" (.002-003" is also acceptable without lash caps). Lifter to Camshaft clearances need to be checked for proper installation. A minimum of .040" is needed. This should be checked between the nose of the cam lobe and the lifter seated in the lifter bore of the case. Spot facing the case lifter bores may be required. Fits 12-1600cc Volkswagen based engines. Must use an early style oil pump designed for flat camshafts.
Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purchase to ensure this part is correct for your project.
Camshaft, 118, .365 Cam Lift, 286 Duration, 108 Lobe Center, Sold ea.
