EMPI

Prevents wheel hop and engine flex by supporting rear of engine.  Installation Note: This device requires drilling of the body to mount the brackets.   Application Note: This is considered a universal part and can fit many different applications based on modifications to the ve..

These new Urethane a-arm bushings are designed to replace the inner sleeve and rubber cushion section of the bushing. This prevents vertical motion at the pivot point which is greatly magnified at the end of the arm, altering any carefully planned alignment. Kit comes complete with four bushings and..

Secures a Type 1 transmission from the bottom of the front case bolts. Supports from under the frame horns to reduce upwards flex and reduce loads on the front transmission mount, zinc plated. Urethane stops included.  Application Note: This is considered a universal part and can fit ..

This tool can be used for the transmission drain plug as well as the fill plug on the VW transmission. Additionally this tool can be used for the pivot bolt on late model IRS chassis. Tool attaches to a 3/8in drive ratchet.  Transmission Drain Plug Socket, 00-5773-0, 17mm, 3/8in. Drive, EM..

This Allen wrench is designed for the transmission fill and drain plugs but will also fit the pivot bolts on late model IRS suspensions.  Transmission Drain Plug Wrench, 17mm, Sold ea...

Facilitate the seamless integration of a complete synchromesh 61-72 transaxle into pans designed for 52-59 models. Easy bolt-on installation, includes hardware.Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. App..

These robust steel mounts serve as a superior alternative to the standard rubber mounts, effectively eradicating any undesirable flex and wheel hop. This proactive solution mitigates the risk of transmission issues, including nose cone breakage and mount fractures, commonly experienced in off-road a..

These robust steel mounts serve as a superior alternative to the standard rubber mounts, effectively eradicating any undesirable flex and wheel hop. This proactive solution mitigates the risk of transmission issues, including nose cone breakage and mount fractures, commonly experienced in off-road a..

EMPI Type-1 2-bolt nose cone transmission mounting kit, thoughtfully engineered to swap out conventional rubber mounting bushings with sturdy solid-style mounts. This kit also replaces the lightweight stamped steel cradle mount, helping to eliminate any undesirable flexing. The entire setup is coate..

EMPI Type-1 2-bolt nose cone transmission mounting kit, thoughtfully engineered to swap out conventional rubber mounting bushings with sturdy solid-style mounts. This kit also replaces the lightweight stamped steel cradle mount, helping to eliminate any undesirable flexing. With this kit it takes th..

These IRS side covers are made from H.D. Aluminum Alloy to handle your high horsepower performance application.  IRS Axle Side Cover, 16-9905-0, Heavy Duty, Aluminum, EMPI, Sold ea...

These Swing Axle side covers are made from H.D. Aluminum Alloy to handle your high horsepower application. Comes with Bowden tube bracket.Swing Axle Side Cover, 16-9903-0, Heavy Duty, Aluminum, EMPI, Sold ea...

Triangulates the shock towers and the frame horns, helping to prevent movement of the engine and trans upon acceleration preventing wheel hop. Adjustable rod ends allow for variations and/or preload. Features 3/4” Steel Tubing, Powder-Coated Black for good looks and durability. Installation Not..

EMPI Heavy Duty Performance Swivel Feet Adjusters feature a large foot print that covers the valve stem to reduce the chance of mushrooming and side load friction. Contact areas are precision ground and hardened. Features slotted screw head design. Kit is complete with rocker stand shims to insure c..

Prevent valve stem wear caused by the side load of high lift cams and high valve spring pressure. A must for any hi-performance engine. Installation requires no special tools. Features slotted screw head design. Each kit includes rocker stand shims for correct height adjustment. M8-1.0 threads.S..

High quality reusable neoprene rubber valve cover gaskets for 12-1600cc 40hp vw engines.  Valve Cover Gasket, 00-9088-0, Neoprene, EMPI, Sold as Pair..

Decrease crankcase pressure, eliminate blow-by and reduce oil loss with these easy to install Valve Cover Vents. Features our Sure O-Ring seal system. Vent into air cleaner or a breather box. Fittings are for 1/2in. I.D. Hose.Application Note: This is considered a universal part and can fit many..

These polished Aluminum Bolt-On Valve Covers fit Type 2/4 1700-2000cc engines. The finned design aids heat dissipation and they look great. Complete with all gaskets and hardware. Uses stock gaskets.Valve Covers, 00-8855-0, Bolt On, Aluminum, Polished, EMPI, Sold as Pair..

Made from investment cast aluminum, with cast in EMPI logo and polished ribs on a black background. The finned design helps reduce upper cylinder head temperature and there is enough clearance for most high lift rocker arms. It also has a boss that can be drilled for venting to a breather box. The s..

What’s old is new again...New EMPI “GT” Valve covers featuring high polished fins and sides with black matte center, deeper bosses for breather vent fittings, and internal gussetting for strength. Enough clearance for most high lift rocker arms. Special C-Channel-Type gaskets and stud seals insure p..

Stamped stainless steel then polished to high luster. EMPI stamped into the valve cover. Clearanced for use with most Hi-Lift Rockers. Includes chrome bales and cork/rubber gaskets.  Application Note: This is considered a universal part and can fit many different applications based on mo..

Handy tool to install new valve guides when rebuilding your cylinder heads. Designed to be used with 8mm valve guides. Application Note: This is considered a universal tool and can fit many different applications based on modifications to the vehicle. Application information is just for referen..

Hardened valve lash caps prevent the valve stem tip from mushrooming under the load of heavy valve spring pressure. These Lash Caps are required when using Stainless Steel Valves in most cylinder head applications. Sold as a set of 8  Application Note: This is considered a universal part a..

This replacement IDF/DRLA/HPMX velocity stack is a bolt on (no machining required) velocity stack that replaces the standard velocity stacks that came on these style carburetors. Made from steel and chrome plated.  Application Note: This is designed to fit Weber IDF, Dellorto DRLA and EMPI..

Aluminum wheel adapter, designed to convert VW 4x130mm drum or rotor lug pattern to Porsche 5x130mm lug pattern. The wheel adapter will add approximately one inch of width per side and comes with M14-1.5 thread in studs. This wheel adapter will require the purchase of part # 70-2863-0 lug bolts for ..