All Products

"Description"  Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purch..

"Description"  Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a stock vehicle configuration. Please verify your application before purch..

Throttle Tube f/Shroud T-1 66-74 f/Accel.Cbl..

EMPI's thru rod clamps thread onto the trailing arm and are locked into place by tightening a set screw. EMPI, Thru Rod Clamps, Set of 4..

The torque multiplier helps tightening and removing the gland nut on 6 volt and 12 volt flywheels. It also help in removing and tightening the axle nut on 5x205 and 4x130 brake drums. The multiplier includes a 6 volt and a 12 volt gear drive for flywheels and a bolt on plate for use with brake drums..

This polyurethane torsion arm seal replaces the worn out rubber torsion arm seal bringing your front suspension back to a stock factory ride and will last for years. This torsion arm seal is made from a durable high quality polyurethane by Prothane for Bugpack and includes a tube of Polyurethane Lub..

This polyurethane torsion arm seal replaces the worn out rubber torsion arm seal bringing your front suspension back to a stock factory ride and will last for years. This torsion arm seal is made from a durable polyurethane.  Installation Note: The stock torsion arm seal can not be us..

This polyurethane torsion arm seal replaces the worn out rubber torsion arm seal bringing your front suspension back to a stock factory ride and will last for years. This torsion arm seal is made from a durable polyurethane.  Installation Note: The stock torsion arm seal can not be us..

This polyurethane torsion arm seal replaces the worn out rubber torsion arm seal bringing your front suspension back to a stock factory ride and will last for years. This torsion arm seal is made from a durable high quality polyurethane by Prothane for Bugpack and includes a tube of Polyurethane Lub..

The strength and durability of Urethane will out-last and out-perform standard rubber products in every application. From Shift Couplers to Bump Stops, install Urethane and never look back! All Urethane is red in color except where noted.Position(s): Front, Left or RightApplication Note: Thi..

These Torsion Springs are for use with Narrowed Adjustable Ball Joint Axle Beams. Two Torsion Spring sets are required per Axle Beam. Torsion Spring Set, 22-2852-0, Narrowed, Ball Joint, Upper or Lower, EMPI, Sold as Set..

Tow Bar Pins, Long Style, w/Clips, Sold in Pair..

Prevents wheel hop and engine flex by supporting rear of engine.  Installation Note: This device requires drilling of the body to mount the brackets.   Application Note: This is considered a universal part and can fit many different applications based on modifications to the ve..

An original design from Bug Pack to eliminate drilling. This brace kit is designed to take the weight and torque of the engine and transmit it to the chassis. Eliminates suspension windup and wheel hop. Simple bolt-on installation and finished with a chrome plated bar and zinc plated hardware. ..

Replacement rubber bushing for the rear trailing arm pivot point. Application Note: This is designed for '68 model cars with IRS rear suspensions. Please verify your application before purchase to ensure this part is correct for your project. Trailing Arm Pivot Bushing, IRS, Left or Right,..

Replacement rubber bushing for the rear trailing arm pivot point. Trailing Arm Pivot Bushing, IRS, Left or Right, Sold ea...

These new Urethane a-arm bushings are designed to replace the inner sleeve and rubber cushion section of the bushing. This prevents vertical motion at the pivot point which is greatly magnified at the end of the arm, altering any carefully planned alignment. Kit comes complete with four bushings and..

Another problem area solved with this slick suspension item. These new Urethane a-arm bushings are designed to replace the inner sleeve and rubber cushion section of the bushing. This prevents vertical motion at the pivot point which is greatly magnified at the end of the arm, altering any carefu..

The EMPI Aluminum Transaxle Case is the perfect starting point when building a High-Performance Transaxle. The Case features a high-quality aluminum alloy with cast in gussets that prove more rigidity and strength. Used by many of the industries top transaxle builders.Application Note: This is consi..

Secures a Type 1 transmission from the bottom of the front case bolts. Supports from under the frame horns to reduce upwards flex and reduce loads on the front transmission mount, zinc plated. Urethane stops included.  Application Note: This is considered a universal part and can fit ..

This tool can be used for the transmission drain plug as well as the fill plug on the VW transmission. Additionally this tool can be used for the pivot bolt on late model IRS chassis. Tool attaches to a 3/8in drive ratchet.  Transmission Drain Plug Socket, 00-5773-0, 17mm, 3/8in. Drive, EM..