Search

This is a replacement oil pressure switch for all Vanagon models from 83-91. This is the low pressure switch located on the driver's side between the push rod tubes for cylinders 3 & 4. This switch is normally closed and will open when the oil pressure reaches 2-5 psi. Installation Note: This is..

Oil Pump Gasket, 111115111A, Oil Pump to Case, 6mm Studs, Paper, Sold ea...

Oil Pump Gasket, 111115111B, Oil Pump to Case, 8mm Studs, Paper, Sold ea...

Oil Pump Gasket, 111115131A, Oil Pump to Cover, 6mm Studs, Paper, Sold ea...

Gasket Oil Pump-Cover 13-1600 8mm/Vngn, Sold ea.Oil Pump Gasket, Oil Pump to Cover, 8mm Studs, Paper, Sold ea...

This is a high quality Schadek aluminum oil pump to fit all Type 4 aircooled engines with 8mm oil pump studs. Installation Note: Longer oil pump studs may be required. Oil Pump, 021115107AK, 26mm Gears, 8mm Studs, Aluminum, Schadek, Sold ea...

Designed to add a full flow oil system without machining the crankcase. Screws into the rear oil by-pass galley (spring & plunger must be removed) and provides the return route for oil from a full flow pump cover. Installs without engine removal. It has an 8AN, 37° male fitting. This can be conv..

This oil strainer gasket features two paper gaskets and copper/aluminum hardware required for removal and reinstallation of the sump plate/drain plate. Oil Strainer Gasket Kit, 12-1600cc, 40hp, Sold as Kit..

Gasket Kit Oil Strainer T-2 17-2000cc / T-4 / 914 Oil Strainer Gasket Kit, 17-2000cc, Sold as Kit..

Gasket Kit Oil Strainer T-2 17-2000cc / T-4 / 914 Oil Strainer Gasket Kit, 17-2000cc, Sold as Kit..

Oil Strainer for 36hp Volkswagen engines starting from engine #1 677 688  Oil Strainer, 111115175A, Stock, 36hp, Sold ea...

This oil strainer is designed for the 40hp single relief engine case from '61-'65 with a small 14mm pickup tube.Application Note: This part can fit many different applications based on modifications to the vehicle. Please verify your application before purchase to ensure this part is correct fo..

This oil strainer is designed for the early 13-1600cc single relief engine case from '66-'69 with a small 16mm pickup tube.Application Note: This part can fit many different applications based on modifications to the vehicle. Please verify your application before purchase to ensure this part is..

This oil strainer is designed for the late model 1600cc dual relief engine case from '70-'79 with a large 19mm pickup tube.Application Note: This oil strainer is used when building a performance based engine combination using an aftermarket engine case. This part can fit many different applications ..

Oil Strainer T-2 72-83 Oil Strainer, 021115175, Stock, Sold ea...

Replacement Drain Plate Gasket for Narrow Oil Sumps with Filter.Will Work With: 17-2871-0Application Note: This is considered a universal part and can fit many different applications based on modifications to the vehicle. Application information is just for reference and not applicable to a ..

Put your oil cooler fan on autopilot with this inline oil temperature thermostat. No worries about cooking your engine because there are no more switches to remember to turn on or off. This inline thermostat attaches to the inlet port of the oil cooler or it can be spliced into existing 1/2in. hose,..

Screw Plug Oil Relief 12-1600cc M18X1.5Plug, Oil Relief, Hex Drive, Sold ea...

Rubber Valve Oil Breathr 12-1600cc Draft Tube Rubber Valve, 311115541, Oil Breather Pipe, Stock, Sold ea...

PennGrade 1 Engine Assembly Lubricant is a premium high viscosity lubricant specifically designed to offer additional protection for “green” moving surfaces in engine assembly applications. Its Pennsylvania Grade base oil provides higher load carrying ability and excellent surface film protection to..

Lucas DOT 3 Brake Fluid is recommended for use in both disc and drum brake system and clutch system where this type of product is called out for. Prevents seal hardening or softening. Protects against rust or corrosion. Compatible with all brake system rubber components and other fluids.Shipping Not..

Lucas DOT 3 Brake Fluid is recommended for use in both disc and drum brake system and clutch system where this type of product is called out for. Prevents seal hardening or softening. Protects against rust or corrosion. Compatible with all brake system rubber components and other fluids.Shipping Not..

PennGrade 1® Break-In Oil SAE 30 provides wear control for critical engine parts while allowing the engine components to seat, resulting in maximum engine performance and life. It is formulated with premium base stocks and a state-of-the-art additive system. Available in SAE 30.PennGrade 1® Break-In..