Engine Case Hardware

Use this billet cam plug during engine assembly for a secure, leak free seal. Fits Volkswagen 12-1600cc engines (40hp). Case must be machined for camshaft plug groove.  Camshaft Plug, 16-9524-0, Billet Aluminum w/O-ring, EMPI, Sold ea...

This metal cam plug is used on 12-1600cc 40hp engine case with a grooved cam plug. Camshaft Plug, 113101157C, Metal, 12-1600cc, Grooved Case, Sold ea...

This cam plug is used on late model engine cases that do not have a groove for the cam plug. Fits Volkswagen 12-1600cc engines (40hp). Camshaft Plug, 040101157, Rubber, 12-1600cc, Non Grooved, Sold ea...

Repair pulled head studs with a new case saver. Case savers provide more surface area for a great hold. This case saver is for M10-1.5 head studs and has a M14-2.0 outer diameter. Case Saver, 113101130, M10-1.5 x M14-2.0, Sold ea...

Repair pulled head studs with a new case saver. Case savers provide more surface area for a great hold. This case saver is for M8-1.25 head studs and has a M12-1.5 outer diameter. Case Saver, 043101130, M8-1.25 x M12-1.5, Sold ea...

Repair pulled head studs with a new case saver. Case savers provide more surface area for a great hold. This case saver is for M8-1.25 head studs and has a M14-2.0 outer diameter.Case Saver, M8-1.25ID x M14-2.0OD, Sold ea...

Repair pulled head studs with a new case saver. Case savers provide more surface area for a great hold. This case saver is for M10-1.5 head studs and has a 1/2-20 outer diameter. These case savers come as a set of 8.  Case Savers, 00-4011-0, M10-1.5ID x 1/2-20OD, EMPI, Sold as Set..

Repair pulled head studs with a new case saver. Case savers provide more surface area for a great hold. This case saver is for M10-1.5 head studs and has a M14-2.0 outer diameter. These case savers come as a set of 8.  Case Savers, 00-4012-0, M8-1.25ID x M12-1.5OD, EMPI, Sold as Set..

Repair pulled head studs with a new case saver. Case savers provide more surface area for a great hold. This case saver is for M8-1.25 head studs and has a M12-1.5 outer diameter. These case savers come as a set of 8.  Case Savers, 00-4004-0, M8-1.25ID x M12-1.5OD, EMPI, Sold as Set..

Repair pulled head studs with a new case saver. Case savers provide more surface area for a great hold. This case saver is for M8-1.25 head studs and has a M14-2.0 outer diameter. These case savers come as a set of 8.  Case Savers, 00-4003-0, M8-1.25ID x M14-2.0OD, EMPI, Sold as Set..

Bolt Starter D Shaped T-1/2/3 Longest One Bolt, 111199101, D-Shaped, Engine to Transmission, Sold ea...

DELUXE ENG HARDWARE KIT,8MM..

Engine Hardware Kit 159Pc Lock Nuts-Washers-ScrewsHardware Kit, Engine Case, 159 Pc, Sold as set...

Engine Lock Nut Kit 38Pcs 12-1600cc Hardware Kit, Engine Case, 38 Pcs, Sold as Kit..

Head Stud Kit Long Chrmly 10mm DP Kit-11mm Longer StudsHead Studs, 10mm, 11mm Longer, Dual Port, Chromoly, Sold as set...

Head Stud Kit Long Chrmly 10mm DP Kit W/Studs/Nuts/WshrsHead Studs, 10mm, Dual Port, Chromoly, Kühltek Motorwerks, Sold as set...

Upgrade your engine's head fastening system with these high-strength 8mm Head Studs, engineered 11mm longer for Dual Port cylinder heads. Crafted from durable Chromoly steel, these studs provide superior clamping force and resist stretching, offering enhanced cylinder head sealing and preventing hea..

Head Stud Kit 15-1600cc Dual PortHead Studs, 8mm, Dual Port, Stock Length, Sold as set...

Head Stud Kit 15-1600cc Single PortHead Studs, 8mm, Single Port, Stock Length, Sold as set...

Bolt Eng-Trans 10 x 70mm 12-1600 Top Short One Bolt, M10x70mm, Engine to Transmission, Sold ea...

Main Bearing dowel pins for bearing alignment to the engine case. Engine Case requires 5pcs. Main Bearing Dowel Pins, Sold as Set..

Nut 10mm Cylinder Head 12-1600cc f/10mm Studs. Sold ea...

Nut 8mm Cylinder Head 12-1600cc Nut, 8mm, Cylinder Head, 12-1600cc, Sold ea...

This oil dipstick boot was designed for the late model Bus but can be used for any Type 1 VW engine to help keep the oil inside the engine when mounted to the dipstick tube.  Oil Dipstick Boot, Sold ea...

Stock length dipstick with a machined aluminum billet style handle will add a little style to your engine compartment.  This dipstick will work with engine cases that have the bolt on style dipstick adapter.  Application Note: This is considered a universal part and can fit many diffe..